Harbor Freight Tools Biscuit Joiner 68114 User Manual

Owner’s Manual & Safety Instructions  
Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating,  
inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual  
near the assembly diagram (or month and year of purchase if product has no number).  
Keep this manual and the receipt in a safe and dry place for future reference.  
11 PIECE CARBON  
STEEL HOLE SAW SET  
ITEM 68114 69070  
Email our technical support at: [email protected]  
When unpacking, make sure that the product is intact  
and undamaged. If any parts are missing or broken,  
please call 1-800-444-3353 as soon as possible.  
©
®
Copyright 2011 by Harbor Freight Tools . All rights reserved.  
No portion of this manual or any artwork contained herein may be reproduced in  
any shape or form without the express written consent of Harbor Freight Tools.  
Diagrams within this manual may not be drawn proportionally. Due to continuing  
improvements, actual product may differ slightly from the product  
Read this material before using this product.  
Failure to do so can result in serious injury.  
SAVE THIS MANUAL.  
described herein. Tools required for assembly and service may not be included.  
 
Setup  
TO PREVENT INJURY:  
Wear heavy-duty work gloves and ANSI-approved safety goggles  
during setup and whenever handling the Hole Saws.  
1. Select the desired size Hole Saw.  
2. Unthread the Mandrel Nut from  
the back of the Mandrel.  
Pilot  
Drill Bit  
3. Insert the Mandrel through the center of  
the Hole Saw, and secure in place using  
the Mandrel Nut.  
Set  
Screw  
Make sure the Hole Saw is held  
securely by the Mandrel Nut.  
4. Open Jaws of Drill Chuck  
(sold separately).  
5. Place the Mandrel Shaft  
completely into the Chuck and  
securely tighten the Chuck.  
Mandrel  
Hole  
Saw  
Mandrel  
Nut  
Item 68114/69070  
For technical questions, please call 1-800-444-3353.  
Page 3  
 
Operation  
1. Holding the drill at 90° to the workpiece, 5. When finished, remove  
set the Hole Saw on the workpiece.  
the Hole Saw from drill’s chuck.  
2. Press the drill’s trigger to turn it on.  
6. Remove Hole Saw from the Mandrel  
and clean off Hole Saw with a cloth.  
3. If the drill is a variable speed type,  
cut the workpiece slowly until a circle  
groove is made in the workpiece.  
Then cut faster.  
7. Store the Hole Saws inside case,  
out of reach of children.  
8. Replace the Pilot Drill Bit if  
dull or broken.  
4. When the hole is cut, release the  
trigger and wait for the Hole Saw  
to come to a complete stop before  
removing it from the workpiece.  
Make sure the Bit is securely held  
in place after being reinstalled.  
Limited 90 Day Warranty  
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality  
and durability standards, and warrants to the original purchaser that this product is free from  
defects in materials and workmanship for the period of 90 days from the date of purchase.  
This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence  
or accidents, repairs or alterations outside our facilities, criminal activity, improper installation,  
normal wear and tear, or to lack of maintenance. We shall in no event be liable for death,  
injuries to persons or property, or for incidental, contingent, special or consequential damages  
arising from the use of our product. Some states do not allow the exclusion or limitation of  
incidental or consequential damages, so the above limitation of exclusion may not apply to you.  
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR  
IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.  
To take advantage of this warranty, the product or part must be returned to us with transportation  
charges prepaid. Proof of purchase date and an explanation of the complaint must accompany  
the merchandise. If our inspection verifies the defect, we will either repair or replace  
the product at our election or we may elect to refund the purchase price if we cannot readily  
and quickly provide you with a replacement. We will return repaired products at our expense,  
but if we determine there is no defect, or that the defect resulted from causes not within  
the scope of our warranty, then you must bear the cost of returning the product.  
This warranty gives you specific legal rights and you may also  
have other rights which vary from state to state.  
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353  
 

Grizzly Drill G4814 User Manual
Harbor Freight Tools Power Hammer 91670 User Manual
Hotpoint Dishwasher FDUD 43133 User Manual
Hotpoint Washer WMYL 8352 User Manual
HP Hewlett Packard Life Jacket tc3100 User Manual
HP Hewlett Packard Personal Computer 6300 User Manual
HP Hewlett Packard Switch 3400CL 24G User Manual
Huffy Fitness Equipment N5 101 User Manual
Hunter Fan Thermostat 44155C User Manual
Hyundai Flat Panel Television E261D User Manual